• 1st Grade jet milling machining silicon carbide

    1st Grade jet milling machining silicon carbide

    Silicon carbide is produced at high temperature in an electric resistance type furnace with quarts sand and petroleum coke as its main raw marterials .Its hardness is between fused alumina and synthetic diamond.Mechanical intensity of it is higher than fused alumina .It is brittle and sharp has electrical and heat conductivity in some degree.The abrasives made of it are suitable for working on cast iron,non-ferrous metal,rock, leather,rubber,etc.It is also broadly used as refractory material and metallurgical additive.

  • Black Silicon Carbide

    Black Silicon Carbide

    It is produced from quartz sand and high quality anthracite under high temperature in an electric resistance furnace. If looks black and has a micro-hardness of 2800-3300kg/mm2, being used for produce the abrasive tools. It is also fit for process the grind metals and non-metals material of low tensile strength, such as grey cast iron, brass, aluminum, stone, leather and hard rubber etc. Also can be used as refractory materials and in electronic industry.

  • 97.5% Silicon Carbide block

    97.5% Silicon Carbide block

    Silicon carbide with 97.5% SiC which is first grade . Specification as follow : SiC: 97.5%min Fe2O3:0.3%max F.C:0.6%max Moisture : 0.5%max CaO:0.05% MgO:0.05 Al2O3:0.05

  • Jet miling machining silicon carbide

    Jet miling machining silicon carbide

    Silicon carbide (SiC), also known as carborundum, is a semiconductor containing silicon and carbon with chemical formula SiC. It occurs in nature as the extremely rare mineral moissanite. As an abrasive, it can be used as a grinding tool, such as grinding wheel, oil stone, grinding head, sand tile, etc.

  • 1st Grade Barmac breaker and Ball mill machining silicon carbide

    1st Grade Barmac breaker and Ball mill machining silicon carbide

    At present, China's industrial production of silicon carbide is divided into black silicon carbide and green silicon carbide two, are hexagonal crystal, green silicon carbide and black silicon carbide is basically the same, but the raw materials and manufacturing processes are produced, the product was green translucent body , Hardness, purity are better than black silicon carbide.

  • Barmac breaker and Ball mill machining silicon carbide

    Barmac breaker and Ball mill machining silicon carbide

    Silicon carbide is made of quartz sand, stone tar (or coal), wood chips and other raw materials in the resistance by high temperature smelting, silicon and carbon bonds made of ceramic compounds. Silicon carbide exists in nature in the form of rare minerals such as mozanite. Since 1893, silicon carbide powder has been used extensively as abrasive. The sintered silicon carbide powder can provide hard ceramic-like silicon carbide particles and can be used in materials such as automotive brake pads, clutches and ballistic vests that require high durability, such as light-emitting diodes, early radio detectors Classes are also used in the manufacture of electronic devices. Silicon carbide is now widely used in the manufacture of high temperature, high voltage semiconductors. By lely method to grow large pieces of silicon carbide single crystal. The gemstone of artificial mulberry is obtained by cutting the bulk silicon carbide single crystal prepared by the Lely method.

  • 2nd Raymond mill machining Silicon carbide

    2nd Raymond mill machining Silicon carbide

    Silicon carbide is produced at high temperature in an electric resistance type furnace with quartz sand and petroleum coke as its main raw materials. Its hardness is between fused alumina and synthetic diamond. The mechanical intensity of it is higher than that of fused alumina. It is brittle and sharp and has electrical and heat conductivity in some degree. Black silicon carbide is suitable for grinding cast iron, non-ferrous metal, leather, rubber, wood, rock, it also be used as high grade refractory material.

  • 1st Grade Raymond mill machining Silicon Carbide

    1st Grade Raymond mill machining Silicon Carbide

    Silicon carbide is produced at high temperature in an electric resistance type furnace with quarts sand and petroleum coke as its main raw marterials .Its hardness is between fused alumina and synthetic diamond.Mechanical intensity of it is higher than fused alumina .It is brittle and sharp has electrical and heat conductivity in some degree.The abrasives made of it are suitable for working on cast iron,non-ferrous metal,rock, leather,rubber,etc.It is also broadly used as refractory material and metallurgical additive.

  • Super grade Raymond mill machining Silicon carbide

    Super grade Raymond mill machining Silicon carbide

    Silicon carbide is made of quartz sand, stone tar (or coal), wood chips and other raw materials in the resistance by high temperature smelting, silicon and carbon bonds made of ceramic compounds. Silicon carbide exists in nature in the form of rare minerals such as mozanite. Since 1893, silicon carbide powder has been used extensively as abrasive. The sintered silicon carbide powder can provide hard ceramic-like silicon carbide particles and can be used in materials such as automotive brake pads, clutches and ballistic vests that require high durability, such as light-emitting diodes, early radio detectors Classes are also used in the manufacture of electronic devices. Silicon carbide is now widely used in the manufacture of high temperature, high voltage semiconductors. By lely method to grow large pieces of silicon carbide single crystal. The gemstone of artificial mulberry is obtained by cutting the bulk silicon carbide single crystal prepared by the Lely method.

123>Total 25 Records
Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Subject :
* Email :
  • Name :

  • Phone:

Message :