• 80% CAC

    80% CAC

    Anthracite carbonizer is an additive for steelmaking. The quality is based on the content of fixed carbon (Fixed Carbon). It is classified into special grade (Fc≥95%), first grade (Fc≥94%), and second grade (Fc≥93%). , three grades (Fc ≥ 90%), in which the fixed carbon content is higher than 95% of the special charcoal, the carbon effect can be comparable with FC: 98% petroleum coke, the price is less than 1/2 of the petroleum coke It is a widely used petroleum coke substitute in the world.

  • Recarburiser for Steelmaking Plant

    Recarburiser for Steelmaking Plant

    Anthracite filter material with high quality anthracite as raw material, through the selection, crushing, and two screening, high mechanical strength, good compression performance, chemical stability, no toxic substances, wear resistance, in acid, neutral, alkaline water are not dissolved, and anthracite particle surface roughness, good adsorption capacity, high porosity, with light, low required back washing strength, can save a lot of water and electricity.

  • Super Activated Carbon

    Super Activated Carbon

    Activated carbon adsorption desulfurization and denitrification technology can realize the resource utilization of pollution control products. 6mm carbon can remove the SO2 in the flue gas desulfurization (sulfur dioxide), denitrification is mainly from NOx in flue gas (nitrogen oxide), the two substances into the atmosphere will be the formation of acid rain, acid rain harm is very large, so now the country has been promoting environmental protection, thermal power plant are now built simultaneous construction of desulfurization, denitrification and now the state has not started to force. It has the advantages of high desulfurization and denitrification efficiency, and is considered as a promising desulfurization and denitrification technology. In all kinds of smoke The activated carbon adsorption method is the only way to remove every impurity in the flue gas,

  • Anthracite Filter Media

    Anthracite Filter Media

    Raw Material: High quality anthracite produced in Ningxia, China Anthracite filter media is a kind of filter used in water treatment. It can be applied in the treatment of common acid, the middle degree alkali. The product has large surface area, and its various indexes all exceed the Construction Department's standard. Anthracite filter media is especially selected from the deep well minerals, so it contains the highest percentage of carbon.The raw material is always filtered and washed to make sure that the product can have good effect on water filtration.

  • Ningxia Carbon

    Ningxia Carbon

    CAC 92 anthracite based carbon additive made from well-selected Ningxia TaiXi anthracite. Mainly used for steelmaking in electrical, foundry industry to increase the content of carbon.

  • Recarburizer

    Recarburizer

    Recarburizer is a product that is added to molten steel. Carbon additive includes calcined petroleum coke, graphite petroleum coke, calcined anthracite coal, electrical calcined anthracite, and natural graphite.

  • carbon additive 93%

    carbon additive 93%

    Anthracite filter material with high quality anthracite as raw material, through the selection, crushing, and two screening, high mechanical strength, good compression performance, chemical stability, no toxic substances, wear resistance, in acid, neutral, alkaline water are not dissolved, and anthracite particle surface roughness, good adsorption capacity, high porosity, with light, low required back washing strength, can save a lot of water and electricity.

  • High carbon ferro silicon

    High carbon ferro silicon

    Ferro Silicon is often used as deoxidizer in steel making.Ferro silicon also can be used as alloy elments join agent, which is widely used in low alloy steel, non-ferrous metal, bearing steel, heat-resistant steels and electrician silicon steel. ·Ferro silicon commonly used as a reducant in ferroalloy production and chemical industry.In iron industry, it often used as inoculant and nodulizer and deoxidizer. Ferro Silicon is often used as deoxidizer in steel making.

  • 94% carbon raiser

    94% carbon raiser

    Specifications calcined petroleum coke/high S graphite recarburizer S 0.5%max stable quality third party inspection OK calcined petroleum coke/high S graphite recarburizer A. Usage: As carbon raiser in special type steel-making and ball iron casting. B. Characters: high carbon, low sulphur,nitrogen and harmful impurities, efficient and stable, high absorbability of carbon. C. Avaliable range: Various steel refoundry, casting. Available specifications: F.C.: 98.5% min. S: 0.50% max. Ash: 0.7% max. V.M.:0.7% max. Moisture: 0.5% max. F.C.: 98% min. S: 0.70% max. Ash: 1% max. V.M.:1% max. Moisture: 0.5% max. Size:1-5mm, 0.5-5mm, 2-6mm, 1-10mm, 3-8mm, etc

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Email :
Company :
  • Name :

  • Phone :

Message :