• Recarburiser for Steelmaking Plant

    Recarburiser for Steelmaking Plant

    Anthracite filter material with high quality anthracite as raw material, through the selection, crushing, and two screening, high mechanical strength, good compression performance, chemical stability, no toxic substances, wear resistance, in acid, neutral, alkaline water are not dissolved, and anthracite particle surface roughness, good adsorption capacity, high porosity, with light, low required back washing strength, can save a lot of water and electricity.

  • Anthracite Filter Media

    Anthracite Filter Media

    Raw Material: High quality anthracite produced in Ningxia, China Anthracite filter media is a kind of filter used in water treatment. It can be applied in the treatment of common acid, the middle degree alkali. The product has large surface area, and its various indexes all exceed the Construction Department's standard. Anthracite filter media is especially selected from the deep well minerals, so it contains the highest percentage of carbon.The raw material is always filtered and washed to make sure that the product can have good effect on water filtration.

  • Ningxia Carbon

    Ningxia Carbon

    CAC 92 anthracite based carbon additive made from well-selected Ningxia TaiXi anthracite. Mainly used for steelmaking in electrical, foundry industry to increase the content of carbon.

  • Recarburizer

    Recarburizer

    Recarburizer is a product that is added to molten steel. Carbon additive includes calcined petroleum coke, graphite petroleum coke, calcined anthracite coal, electrical calcined anthracite, and natural graphite.

  • carbon additive 93%

    carbon additive 93%

    Anthracite filter material with high quality anthracite as raw material, through the selection, crushing, and two screening, high mechanical strength, good compression performance, chemical stability, no toxic substances, wear resistance, in acid, neutral, alkaline water are not dissolved, and anthracite particle surface roughness, good adsorption capacity, high porosity, with light, low required back washing strength, can save a lot of water and electricity.

  • Recaurburizer 94%

    Recaurburizer 94%

    Anthracite filter material is widely used in water treatment industry. Anthracite filter material is a high quality anthracite as raw material, by crushing, powder, sieve and other processes Anthracite filter material in the process of filtering , directly affect the filtration of water quality, so the choice of the filter material must meet the following requirements: 1. High mechanical strength, crushing rate and wear rate should not be higher than 3% (by weight). 2. Stable chemical properties, without toxic and harmful substances. It is insoluble in ordinary acid, alkaline and neutral water. Our products are determined by China water treatment filter media supervision and testing center: the hydrochloric acid soluble rate is 0.98% (the ministerial standard is 3.5), all kinds of water sources can achieve good purification effect. 3. The particle size distribution is reasonable and the specific surface area is good. The appearance of the product is spherical and angular, glossiness is good, and it is screened by mechanical vibration for three times. The gradation accords with the relevant technical indexes. 4. The particle size range is less than the specified minimum diameter, according to the weight is not greater than 3%, greater than the specified upper limit of particle size, not more than 2% by weight.

  • Anthracite filter material

    Anthracite filter material

    Anthracite filter material is widely used in water treatment industry. Anthracite filter material is a high quality anthracite as raw material, by crushing, powder, sieve and other processes

  • 94% CAC

    94% CAC

    Features: Carbon Additive also called Calcined anthracite Coal, Gas Calcined Anthracite Coal, Carbon Raiser. The main raw material is Ningxia unique high quality anthracite, with characteristic of low ash and low sulfur. Carbon additive has two main uses, namely as the fuel and additive. When being used as the carbon additive of steel-smelting, and casting, the fixed carbon may achieve above 95%. Application: It may substitute massively refinery coke or the stone grinds. Meanwhile its cost is much less than the refinery coke and the stone grinds. Carbon Additive may also use as the fuel, for its calorific value may achieve above 9386K/KG. It may substitute burnt carbon massively. The burnt carbon exportation needs the quota; Therefore the carburizing agent price superiority is similarly obvious.

  • carbon additive 95% in Ningxia

    carbon additive 95% in Ningxia

    carbon additive 95% it is made from well selected ningixa taixi anthracite,used to add the carbon content of the burned steel during the smelting process.mainly used for electrical manufacturing and foundry industry,carbon additive 95% carbon have 95%,ash: 4.0% max,moisture `0.5max

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Email :
Company :
  • Name :

  • Phone :

Message :