• 2nd Raymond mill machining Silicon carbide

    2nd Raymond mill machining Silicon carbide

    Silicon carbide is produced at high temperature in an electric resistance type furnace with quartz sand and petroleum coke as its main raw materials. Its hardness is between fused alumina and synthetic diamond. The mechanical intensity of it is higher than that of fused alumina. It is brittle and sharp and has electrical and heat conductivity in some degree. Black silicon carbide is suitable for grinding cast iron, non-ferrous metal, leather, rubber, wood, rock, it also be used as high grade refractory material.

  • 97.5% Silicon Carbide block

    97.5% Silicon Carbide block

    Silicon carbide with 97.5% SiC which is first grade . Specification as follow : SiC: 97.5%min Fe2O3:0.3%max F.C:0.6%max Moisture : 0.5%max CaO:0.05% MgO:0.05 Al2O3:0.05

  • Silicon Carbide Powder

    Silicon Carbide Powder

    Silicon carbide powder of SiC 98.0% min ,Fe2O3 is 0.08% max,particle size can pass 100-180mesh sieve . This product also known as silicon carbide sand,generally divided into mesh grade sand from 8#-320#,the greater the number is,the smaller particle size it is. Silicon carbide particle size of sand is dvided into green and black. It is the ideal for abrasive material,mainly used in polishing and grinding wheel,cutting slices,and etc sectors in abrasive industry.

  • Green Silicon Carbide

    Green Silicon Carbide

    Green color silicon carbide is a rare quatity product,it's content of SiC can be as 98.5% Min ,F.C content of 0.2% Max,Fe2O3 is of 0.2% max. It is also produced from quartz sand and high quality anthracite under high temperature inan electric resistance furnace. ,and crushed by Barmak mill and ball mill,can be as deoxidizer and high temperature resistant material and Refractory materials.

  • 1st Grade jet milling machining silicon carbide

    1st Grade jet milling machining silicon carbide

    Silicon carbide is produced at high temperature in an electric resistance type furnace with quarts sand and petroleum coke as its main raw marterials .Its hardness is between fused alumina and synthetic diamond.Mechanical intensity of it is higher than fused alumina .It is brittle and sharp has electrical and heat conductivity in some degree.The abrasives made of it are suitable for working on cast iron,non-ferrous metal,rock, leather,rubber,etc.It is also broadly used as refractory material and metallurgical additive.

  • Black Silicon Carbide

    Black Silicon Carbide

    It is produced from quartz sand and high quality anthracite under high temperature in an electric resistance furnace. If looks black and has a micro-hardness of 2800-3300kg/mm2, being used for produce the abrasive tools. It is also fit for process the grind metals and non-metals material of low tensile strength, such as grey cast iron, brass, aluminum, stone, leather and hard rubber etc. Also can be used as refractory materials and in electronic industry.

  • Silicon Carbide Grit

    Silicon Carbide Grit

    Silicon carbide (SiC), also known as carborundum, is a semiconductor containing silicon and carbon. It occurs in nature as the extremely rare mineral moissanite. Synthetic SiC powder has been mass-produced since 1893 for use as an abrasive. Grains of silicon carbide can be bonded together by sintering to form very hard ceramics that are widely used in applications requiring high endurance, such as car brakes, car clutches and ceramic plates in bulletproof vests.

  • Silicon Carbides Sand Of Particle Size

    Silicon Carbides Sand Of Particle Size

    Silicon carbide (SiC), also known as carborundum /kɑːrbəˈrʌndəm/, is a semiconductor containing silicon and carbon. It occurs in nature as the extremely rare mineral moissanite. Synthetic SiC powder has been mass-produced since 1893 for use as an abrasive.

  • Silicon Carbide Particles

    Silicon Carbide Particles

    Black silicon carbide  particle size sand of SiC 98.0% min ,Fe2O3 is 0.08% max,particle size can pass 100-180mesh sieve . This product also known as silicon carbide sand,generally divided into mesh grade sand from 8#-320#,the greater the number is,the smaller particle size it is. Silicon carbide particle size of sand is dvided into green and black. It is the ideal for abrasive material,mainly used in polishing and grinding wheel,cutting slices,and etc sectors in abrasive industry.

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Email :
Company :
  • Name :

  • Phone :

Message :