• Home
  • >
  • Products

Anthracite Based Carbon Additive

  • 80% CAC

    80% CAC

    Anthracite carbonizer is an additive for steelmaking. The quality is based on the content of fixed carbon (Fixed Carbon). It is classified into special grade (Fc≥95%), first grade (Fc≥94%), and second grade (Fc≥93%). , three grades (Fc ≥ 90%), in which the fixed carbon content is higher than 95% of the special charcoal, the carbon effect can be comparable with FC: 98% petroleum coke, the price is less than 1/2 of the petroleum coke It is a widely used petroleum coke substitute in the world.

  • Anthracite Filter Media

    Anthracite Filter Media

    Raw Material: High quality anthracite produced in Ningxia, China Anthracite filter media is a kind of filter used in water treatment. It can be applied in the treatment of common acid, the middle degree alkali. The product has large surface area, and its various indexes all exceed the Construction Department's standard. Anthracite filter media is especially selected from the deep well minerals, so it contains the highest percentage of carbon.The raw material is always filtered and washed to make sure that the product can have good effect on water filtration.

  • Recarburizer

    Recarburizer

    Recarburizer is a product that is added to molten steel. Carbon additive includes calcined petroleum coke, graphite petroleum coke, calcined anthracite coal, electrical calcined anthracite, and natural graphite.

  • 94% carbon raiser

    94% carbon raiser

    Specifications calcined petroleum coke/high S graphite recarburizer S 0.5%max stable quality third party inspection OK calcined petroleum coke/high S graphite recarburizer A. Usage: As carbon raiser in special type steel-making and ball iron casting. B. Characters: high carbon, low sulphur,nitrogen and harmful impurities, efficient and stable, high absorbability of carbon. C. Avaliable range: Various steel refoundry, casting. Available specifications: F.C.: 98.5% min. S: 0.50% max. Ash: 0.7% max. V.M.:0.7% max. Moisture: 0.5% max. F.C.: 98% min. S: 0.70% max. Ash: 1% max. V.M.:1% max. Moisture: 0.5% max. Size:1-5mm, 0.5-5mm, 2-6mm, 1-10mm, 3-8mm, etc

  • Anthracite filter material

    Anthracite filter material

    Anthracite filter material is widely used in water treatment industry. Anthracite filter material is a high quality anthracite as raw material, by crushing, powder, sieve and other processes

  • 94% CAC

    94% CAC

    Features: Carbon Additive also called Calcined anthracite Coal, Gas Calcined Anthracite Coal, Carbon Raiser. The main raw material is Ningxia unique high quality anthracite, with characteristic of low ash and low sulfur. Carbon additive has two main uses, namely as the fuel and additive. When being used as the carbon additive of steel-smelting, and casting, the fixed carbon may achieve above 95%. Application: It may substitute massively refinery coke or the stone grinds. Meanwhile its cost is much less than the refinery coke and the stone grinds. Carbon Additive may also use as the fuel, for its calorific value may achieve above 9386K/KG. It may substitute burnt carbon massively. The burnt carbon exportation needs the quota; Therefore the carburizing agent price superiority is similarly obvious.

Carbon Additive

  • Recarburiser for Steelmaking Plant

    Recarburiser for Steelmaking Plant

    Anthracite filter material with high quality anthracite as raw material, through the selection, crushing, and two screening, high mechanical strength, good compression performance, chemical stability, no toxic substances, wear resistance, in acid, neutral, alkaline water are not dissolved, and anthracite particle surface roughness, good adsorption capacity, high porosity, with light, low required back washing strength, can save a lot of water and electricity.

  • Ningxia Carbon

    Ningxia Carbon

    CAC 92 anthracite based carbon additive made from well-selected Ningxia TaiXi anthracite. Mainly used for steelmaking in electrical, foundry industry to increase the content of carbon.

  • carbon additive 93%

    carbon additive 93%

    Anthracite filter material with high quality anthracite as raw material, through the selection, crushing, and two screening, high mechanical strength, good compression performance, chemical stability, no toxic substances, wear resistance, in acid, neutral, alkaline water are not dissolved, and anthracite particle surface roughness, good adsorption capacity, high porosity, with light, low required back washing strength, can save a lot of water and electricity.

  • Recaurburizer 94%

    Recaurburizer 94%

    Anthracite filter material is widely used in water treatment industry. Anthracite filter material is a high quality anthracite as raw material, by crushing, powder, sieve and other processes Anthracite filter material in the process of filtering , directly affect the filtration of water quality, so the choice of the filter material must meet the following requirements: 1. High mechanical strength, crushing rate and wear rate should not be higher than 3% (by weight). 2. Stable chemical properties, without toxic and harmful substances. It is insoluble in ordinary acid, alkaline and neutral water. Our products are determined by China water treatment filter media supervision and testing center: the hydrochloric acid soluble rate is 0.98% (the ministerial standard is 3.5), all kinds of water sources can achieve good purification effect. 3. The particle size distribution is reasonable and the specific surface area is good. The appearance of the product is spherical and angular, glossiness is good, and it is screened by mechanical vibration for three times. The gradation accords with the relevant technical indexes. 4. The particle size range is less than the specified minimum diameter, according to the weight is not greater than 3%, greater than the specified upper limit of particle size, not more than 2% by weight.

  • Recaurburizer

    Recaurburizer

    Anthracite filter material with high quality anthracite as raw material, through the selection, crushing, and two screening, high mechanical strength, good compression performance, chemical stability, no toxic substances, wear resistance, in acid, neutral, alkaline water are not dissolved, and anthracite particle surface roughness, good adsorption capacity, high porosity, with light, low required back washing strength, can save a lot of water and electricity.Anthracite filter material with quartz sand filter material with the use of the current promotion of double rapid filter and three layer filter, filter tank filter is the best material to increase the filter speed increase the unit area of water and increase the sewage interception capacity, reduce the project cost and reduce the area of the most effective way.

  • carbon raiser 95%

    carbon raiser 95%

    Anthracite filter material with high quality anthracite as raw material, through the selection, crushing, and two screening, high mechanical strength, good compression performance, chemical stability, no toxic substances, wear resistance, in acid, neutral, alkaline water are not dissolved, and anthracite particle surface roughness, good adsorption capacity, high porosity, with light, low required back washing strength, can save a lot of water and electricity.Anthracite filter material with quartz sand filter material with the use of the current promotion of double rapid filter and three layer filter, filter tank filter is the best material to increase the filter speed increase the unit area of water and increase the sewage interception capacity, reduce the project cost and reduce the area of the most effective way.

Petroleum Coke

  • Calcined Petroleum Coke

    Calcined Petroleum Coke

    Calcined Petroleum Coke is raw material comes from north China-green pet coke, which is with lowest sulphur content and Nitrogen content, lower volatile matter,producing graphite electrode, anode paste, carbon additive.

  • Low Sulphur Petroleum Coke

    Low Sulphur Petroleum Coke

    Ash, sulfur, gases are significantly reduced after high temperature processing, it has the features of high carbon, low sulphur, low nitrogen and low harmful impurities,1.Mainly used in steelmaking in electrical stove, screening water, Also for shipbuilding sandblast to remove rust,producing carbon materials. 2.Reduce the cost of steelmaking effectively by replacing the traditional carburant. 3.Also can improve the Carbon content in steel-melting and Ductile iron foundry. 4.Reducing agent/reductant in chemical industries 5.Refractory materials ,etc.

  • Raw Petroleum Coke

    Raw Petroleum Coke

    Graphitized Petroleum Coke has the features of high carbon, low sulphur, and low harmful impurities. It has been widely used for steel-smelting, casting, brake pedal and friction material etc

  • Graphitized Petroleum coke

    Graphitized Petroleum coke

    1.Characteristics: High carbon, low sulfur, low nitrogen,high graphitization degree,high carbon recovery (92% ~ 98%),with stable effect on improving the carbon content. 2.Application: Graphitized Petroleum coke is mainly used for metallurgy & foundry, it can improve the carbon content in steel-melting and casting, Also it can increase the quantity of scrap steel and reduce the quantity of pig iron, or use no scrap iron at all. It's also can be used for brake pedal and friction material.

  • Non Calcined Petroleum Coke

    Non Calcined Petroleum Coke

    Mainly used for steelmaking in electrical, foundry industry to increase the content of carbon

  • Calcium Petroleum Coke

    Calcium Petroleum Coke

    This calcined petroleum coke S content only is 0.1%, fixed carbon(F.C) can be 98% min.

12>Total 101 Records
Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Email :
Company :
  • Name :

  • Phone :

Message :